杠杆式力标准机自动控制系统

介绍单片机用于杠杆式力标准机控制、实现检定过程自动化的设计方法，重点介绍硬件结构和软件编制。     

用薄板等积变换方法制造起伏构造的工艺问题研究(英文)

研究了用于夹层壁板的新型轻质芯材的制造问题。该种芯材是一种可改变平面方向的褶皱构造。采用薄板等积变换通过局部弯曲而不拉伸材料的方法制造该种芯材已成为可能。其主要难点在于 ,必须实现沿复杂的展开图上所有的画线同时弯曲。现借助于成形过程中使原来的构形组件变形解决其造型问题。本文提出的工艺方法可用于不同材料的深度起伏构造制造 ,如金属薄板和纸等。     

同轴探针对称激励矩形波导模式谱图研究

通过理论分析证明，同轴探针对称激励矩形波导时，其模式谱图中不存在引起合成场结构不对称的高次模TE20及TE01模。应用分式线性变换检测法进行了对比测试，验证了理论分析结果的正确性。对聚四氟乙烯样品，在7—16GHz频带内测量其复介电常数均有较高的测量精度。实验表明，在一定条件下，标准三公分波导工作频率可高达16GHz，如果取波导宽窄边比r=3，工作频率可达19GHz。所得结果对于微波材料宽带测量具有实用价值。     

波纹板成型模数控加工技术

介绍了波纹板成型模数控加工工艺方法及特点，详细论述了数控加工的优点，并结合实例进行工艺方案分析。实践证明，该项加工技术不仅加工质量好，且大大提高了生产效率，降低了生产成本。     

线状阴极数控展成电解加工成形规律的研究

分析了数控展成电解加工成形规律研究的必要性,对展成电解加工进给运动进行分析简化,提出一种在工程中实用的加工间隙计算方法,并对实际求解结果和试验结果进行比较验证,用此研究结果指导数控编程,取得了良好的应用效果     

粉末冶金γ-TiAl基合金研究的最新进展

γ TiAl基合金是一种具有发展前途的新一代高温结构材料。首先综述了γ TiAl基合金的性能特点和应用前景 ,并简单介绍了该合金的最新基础研究情况。随后介绍了采用粉末冶金方法制备γ TiAl基合金的基本工艺、力学性能 ,最后结合γ TiAl基合金排气阀和板材的研制论述了粉末冶金在γ TiAl基合金制备及近净成形方面的优势和发展前景     

热处理对激光直接沉积成形A-100钢基体组织及性能的影响

研究了激光直接沉积成形A-100钢沉积态及热处理态组织,通过调整热处理工艺获得激光直接沉积成形A-100钢回火马氏体+回火贝氏体混合基体组织。不同热处理工艺下性能对比结果表明,相比淬火马氏体组织,回火贝氏体+回火马氏体混合组织具有更高的强度,但塑性有所下降。     

致密金属零件的激光近形制造

介绍了激光近形制造系统的组成,分析了该技术的特点和应用场合,指出了目前存在的问题和解决办法.     

Robust adaptive fault-tolerant control of a tandem coaxial ducted fan aircraft with actuator saturation

This paper is concerned with the robust adaptive fault-tolerant control of a tandem coaxial ducted fan aircraft under system uncertainty, mismatched disturbance, and actuator saturation. For the proposed aircraft, comprehensive controllability analysis is performed to evaluate the controllability of each state as well as the margin to reject mismatched disturbance without any knowledge of the controller. Mismatched disturbance attenuation is ensured through a structured H-infinity controller tuned by a non-smooth optimization algorithm. Embedded with the H-infinity controller, an adaptive control law is proposed in order to mitigate matched system uncertainty and actuator fault. Input saturation is also considered by the modified reference model. Numerical simulation of the novel ducted fan aircraft is provided to illustrate the effectiveness of the proposed method. The simulation results reveal that the proposed adaptive controller achieves better transient response and more robust performance than classic Model Reference Adaptive Control (MRAC) method, even with serious actuator saturation.     

Stability analysis of an aeroelastic system with friction

In this paper, harmonic balance method, exact formulation and numerical simulation method are adopted to study the effects of different friction stiffness on the stability of 1.5 degrees of freedom aeroelastic system. On this basis, the expressions of input energy and dissipated energy are deduced, and the energy method is used to reveal the mechanisms of the stable boundary and unstable boundary existing in the system and the effects of different friction stiffness on the stability of the system. Studies have shown that the stability region and the critical aerodynamic damping ratio of the system rise with the increase of the friction stiffness, while the friction stiffness has little effect on the stability boundary. In the analysis of the stability of system, the results of harmonic balance method, exact formulation and Newmark of numerical simulation method are in good agreement. Compared with exact formulation and numerical simulation method, the concept and conclusion of harmonic balance method are simple in the system stability analysis.